Call us
MODEL 156

MODEL 156

Call for Price

Price

Make:
360 Yield Center
Model:
MODEL 156
  • The Heavy Duty Frame is constructed of structural 4″ x 4″ steel tubing welded into a unitized one-piece frame. All high stress areas are reinforced to resist bending and twisting.
  • The Vertical Clearance between the chisel point and the bottom of the frame is 26″ or 32″ depending on the tine size.
  • Tines are mounted 24″ apart on the 2 Bar units and 36″ apart on the 3 Bar units. Then they are staggered from front to rear with a spacing from the center of the unit yielding a 12″ pattern.
  • The Rigid Tine Pivot Assemblies are used where rocks are not a problem. Available on 5′ and 7′ 2-Bar units only.
  • The Spring Tine Pivot Assemblies feature dual springs made of ½” oil tempered steel for strength and durability. The spring mounts are cast with internal and external helicals that match the ends of the springs. As the spring is stressed, the load is distributed evenly out the entire length of the spring. This distribution aids in avoiding stress concentrations.

Similar Products

MODEL 93

MODEL 93

Strong relube Quadraseal Ball Bearings on the Model 93 mean long life...
MODEL 47

MODEL 47

Category I Hitch is ideal for small tractors with 25 – 30 HP. The h...
MODEL 62

MODEL 62

Gangs are assembled in the factory and tightened to 750 ft. lbs. The...
MODEL 76/77

MODEL 76/77

The MAINFRAMES of the 76/77 combine structural steel tubing and stren...
MODEL 220

MODEL 220

The Tool Bar on the Model 220 is constructed from a ½ x 4 x 7"...
MODEL 52

MODEL 52

The Main Frame is constructed of ¼” thick steel tubing a...
MODEL 37

MODEL 37

The front and rear frame of the Athens 37 is constructed of angle and...
MODEL 65

MODEL 65

The frame of the Athens 65 is constructed heavy and durable steel ang...